Monitor
Static Control
Antistatic, Mats / Checker / Monitor
Multimount Continuous
Surface Resistance Checker
Easily determine if a surface is dissipative,
Continuously monitors single operator and ESD workstation—
eliminating the need for periodic testing
■ Meet ISO 9000 and ANSI/
ESD S20.20 test logging
requirements
■ Audible and visual alarms
notify operator of
out-of-limit conditions
■ Easily install on most
equipment or workbench
surfaces
Use this continuous monitor to
ensure that critical ESD generators
conductive, or insulative
Ensure compliance to
ANSI/ESD S20.20-2007
per ESD TR53
Use optional electrodes
for resistance
measurements of
larger surfaces
This portable meter is perfect
for quick checks of surface
resistance for ESD control
applications in electronics
manufacturing or handling
environments. Simply press and
in sensitive areas are effectively
grounded. Unit features green (grounded)
20028-08
hold the test button until the bright
LEDs display the reading level.
Unit features an automatic test
and red (not grounded) LEDs notifying operator of continuous
personal and mat grounding status.
The 4-mm parking snap allows time for the operator to disconnect
the coil cord from the wrist band and park it on this snap. While
parked, the coil cord disables the alarm, allowing the operator to
leave the workstation. Upon returning and removing the coil cord
from the parking snap, the operator has six seconds to hook up to
the wrist band before the alarm sounds.
What’s included: two 6-ft (1.8-m) mat monitor cords, two push-
and-clinch snaps, mounting hardware and brackets, one set of
voltage selector allowing the test
voltage to switch from 10 V to
100 V if the measured resistance
exceeds 1 x 10E5 ohms. Two banana
jacks and an electrode toggle switch
allow for the connection of two
optional external 5-lb electrodes that
measure surface resistance point to
point, or resistance to equipment ground.
What’s included: one 9 V battery and
20028-01
hook-and-loop fasteners, and
NIST-traceable calibration report supplied by the manufacturer.
Specifications
Range: 500 KΩ to 10 MΩ Dimensions (L x W x H):
NIST-traceable calibration report supplied by the manufacturer.
Specifications
Range: 10E3 to 10E12 ohms Power: one 9 V battery
Accuracy: ±1?2 decade Dimensions (L x W x H): 51?4" x 3" x 1"